Tap Replacement in Staple Hill

Tap replacement in Staple Hill from Dynamic Bathrooms covers kitchen, basin and bath taps. We check the isolation valves and the pipe tails first, so the job does not turn into a surprise on the day.

Signs a Tap Needs Replacing Rather Than Fixing

A drip is often just a worn washer or cartridge and is worth repairing. But if the body is pitted, the handle is loose at the base, or the finish has flaked, a new tap is the better spend. Spares for older taps can also be impossible to find.

More Information

Checking What Sits Under the Sink

The tap is the easy part. What decides the job is whether there are working isolation valves, whether the tails are corroded and whether there is room to get a spanner in. We look underneath before quoting so the price covers what is really there.

Matching a Tap to Your Water Pressure

Some taps need a minimum pressure to work properly. Fit a low pressure tap on a mains fed system, or a high pressure one on a gravity tank, and the flow will disappoint. We check what supply you have and point you at taps that will actually perform.

About us

Tap changes are small jobs, but they are the ones people put off because of what might be lurking under the sink. Dynamic Bathrooms has 20 years of plumbing behind it, and we would rather spend ten minutes checking the valves and tails than start a job blind.

  • NVQ Level 2 qualified bathroom fitters

  • G3 Unvented registered for cylinder work

  • SSSTS certified for site safety

  • 20 years fitting bathrooms around Bristol

  • Plumbing and tiling kept in house

STILL NOT SURE?

Frequently Asked Questions

How long does tap replacement take in Staple Hill?

Around an hour for a straightforward swap where the isolation valves work and the tails come off cleanly. Seized fittings, corroded tails or a stone worktop with a tight cutout can double that. We tell you what we have found before the time starts running away.

Can I fit any tap to my kitchen sink?

Not always. The hole size, the depth of the worktop, the number of tap holes and your water pressure all narrow the choice. A tall spout over a shallow sink also splashes badly. Send us a photo or the model and we will tell you whether it suits.

Why does my new tap have poor flow?

Most often a blocked aerator, a partially closed isolation valve, or a tap that needs more pressure than your system gives. Debris disturbed during fitting can also block the cartridge. All three are quick to check, and we will do it rather than leaving you with a tap that trickles.

Our reviews